Dynatech MP-7000 Manual de servicio Pagina 70

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 92
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 69
66 9650-0801-01 Rev. A
5 Remove screw in the middle of the plastic
isolator (located on top of the processor
board) in the area illustrated.
Note: During reassembly, torque screw to 6
in-lbs.
6 Remove the plastic isolator shield.
7 Remove the four (4) screws in the areas
illustrated.
Note: During reassembly, torque screws to
6 in-lbs.
8 Lift up the processor board and remove the
brown flex cable (there are two
connections).
9 Lift out the processor board.
10 Remove the black cable from the capacitor
in the area illustrated.
brown flex cable
Vista de pagina 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 91 92

Comentarios a estos manuales

Sin comentarios